• Eme
  • Eme
  • Eme
  • Eme
Large Pipes Hanging

Minimum Charges

Non-Destructive Testing
Magnetic Inspection $90.00
Penetrant Inspection 90.00
Rockwell (Hardness) 60.00
Conductivity 50.00
Copper Sulfate Test 40.00*
Salt Spray Test 70.00*
Water Immersion Test 70.00*
High Humidity Test 70.00*
Cleaning
Passivate 70.00
Solvent Clean 60.00
Aluminum Clean/Etch 60.00
Titanium Clean/Etch 90.00
Stainless Steel Etch 100.00
Inconel Etch 250.00
Miscellaneous
Electro Polish 130.00
Stress Relieve 100.00*
Source Inspection 150.00*
Additional Certification Charge 40.00*
Paint Stripping - Chemical 150.00*
Paint Stripping - Poly Plus 150.00*
T-Peel Testing 300.00*
Magnetic Technique Charge 100.00*
Anodize/Chem Film
Chromic Anodize Type I 100.00
Sulfuric Anodize Type II 90.00
BAC 5019 120.00
BAC 5632 - Boric/Sulfuric 120.00
Chem Film - Alodine/Irridite 80.00
White Gold Anodize 250.00
Titanium Anodize 250.00
Titanium Chem Film 100.00
Painting
Prime [All Types] 120.00
Dry Lube (Solid Film) 120.00
Top Coat 170.00
Fuel Tank Coat (FTC) 170.00
Teflon Coat (Anti-Chafe) 300.00
Adhesive Bond Primer 250.00
Prime or FTC on Nylon 250.00
Sol-Gel 200.00
Masking 60.00*
Blasting
Aluminum Oxide 90.00
Plastic Media 150.00*
Vapor Blast 200.00*

The minimum charges above do not include a 10% hazardous waste surcharge which applies to all paint and processing. Minimum charges are started with the highest process minimum, plus 50% of each additional process minimum thereafter.

* These charges are always billed at the listed amount (50% discount does not apply).